Measuring Instruments

Showing all 12 results

  • 0 out of 5

    Aluminium Level 1000mm

    KSh2,300.00
  • 0 out of 5

    Digital Micrometer

    KSh8,550.00
  • 0 out of 5

    Digital Voltage Tester

    KSh250.00
  • 0 out of 5

    LASER DISTANCE METER 40M

    KSh11,437.00
  • 0 out of 5

    MEASURING TAPE 3 M X 16 MM

    KSh450.00KSh830.00
  • 0 out of 5

    MEASURING TAPE 5M/16FT

    KSh546.00
  • 0 out of 5

    MECHANICAL MICROMETER 0-25MM

    KSh3,575.00KSh4,350.00

    Description
    Technical data
    Measuring range: 0 – 25 mm
    Accuracy: 0.01 mm
    Operating temperature: 5 C – 40 C / 41 F – 104 F
    Humidity influence: Not significant below 80% RH
    Intended use / Application
    For precise measurements in the range from 0 to 25 mm
    How to use
    Preparation to work:
    – Clean the measuring surfaces and the guide. Use a cotton cloth for this. Do not use solvents or acids.
    – Check the zero position and, if necessary, adjust with the supplied wrench until the line marked “0” on the drum is in line with the horizontal line on the scale.

    Measurement method:
    – The drum may only be turned after unlocking the retaining clamp.
    – Spread the measuring surfaces a distance slightly greater than the measured object.
    – Then adjust coarse by turning with the drum, then continue tightening by turning the knob of the friction clutch.
    – Stop tightening when the clutch works, i.e. a further turn of the knob will not cause the rotation of the drum.
    – Read the measurement result according to the measuring principle shown in the figure.

    It is recommended to attach the workpiece or micrometer before starting the measurement. This will allow you to achieve the highest measurement accuracy.
    It is also recommended to carry out several measurements to obtain the arithmetic mean of the results.

  • 0 out of 5

    VERNIER CALIPER(0-200)

    KSh5,300.00

    STAINLESS STEEL, RANGE 0-150 MM (6″); ADDITIONAL SCALE 0,02 MM; ACCURACY 0.001″; MM AND INCH SCALE, WITH FINE-ADJUSTER

  • Yamato Yato
    0 out of 5

    Yamato Dial Indicator Gauge With Magnetic Base

    KSh15,000.00

    Professional Precision Tool Set in a Fitted Case!
    Dial Indicator: Fine tune your machinery by adding a dial indicator to your set of tools. This 1″ stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100″, indicated by the revolution counter. The resolution is 0.001″. There is a mounting lug on the back of the case.
    Features:
    Easy to read 2-1/4” white face with black markings
    Crisp graduations
    Durable satin chrome finish
    Spindle rack pinions and gear trains are made of high quality steel components ensuring long life
    Built to AGD specifications
    Vertical lug back configuration
    Graduations: 001” per line, 0.1” per revolution
    Magnetic Base: Attach this powerful magnet to flat or round surfaces. Reach as far as 12” with multi-positional joints and easy-adjusting posts. Knurled thumbscrews give a positive grip. Features magnetic base, upright post swivel, upright post, swivel snug, gauge rod, and indicator clamp.

    Features:
    Fine Adjustment
    V-Groove base allows mounting it on cylindrical surfaces
    Point Set: Choose the right end for your indicator to fit the surface from this 22 pc set.

  • Yato
    0 out of 5

    YATO Measuring Tape

    KSh300.00

    SKU: YA368IP06AZ9FNAFAMZ
    Size (L x W x H cm): 5 x 2 x 5
    Weight (kg): 0.15
    Main Material: ABS, Steel