HOME
Showing 133–144 of 207 results
-
MECHANICAL MICROMETER 0-25MM
KSh3,575.00 – KSh4,350.00Description
Technical data
Measuring range: 0 – 25 mm
Accuracy: 0.01 mm
Operating temperature: 5 C – 40 C / 41 F – 104 F
Humidity influence: Not significant below 80% RH
Intended use / Application
For precise measurements in the range from 0 to 25 mm
How to use
Preparation to work:
– Clean the measuring surfaces and the guide. Use a cotton cloth for this. Do not use solvents or acids.
– Check the zero position and, if necessary, adjust with the supplied wrench until the line marked “0” on the drum is in line with the horizontal line on the scale.Measurement method:
– The drum may only be turned after unlocking the retaining clamp.
– Spread the measuring surfaces a distance slightly greater than the measured object.
– Then adjust coarse by turning with the drum, then continue tightening by turning the knob of the friction clutch.
– Stop tightening when the clutch works, i.e. a further turn of the knob will not cause the rotation of the drum.
– Read the measurement result according to the measuring principle shown in the figure.It is recommended to attach the workpiece or micrometer before starting the measurement. This will allow you to achieve the highest measurement accuracy.
It is also recommended to carry out several measurements to obtain the arithmetic mean of the results. -
Memory Recorder – Model: SP3000-01
Non-Contact AC Voltage probe set, includes SP3000 control unit and SP9001 probe, 5 Vrms rated, 10 Hz to 100 kHz bandwidth
-
Memory Recorder – Model: SP7001
Non-Contact CAN Sensor, requires SP7100 and SP9200
-
METAL CUTTING DISC
KSh100.00 – KSh230.00 -
OIL FEED GLASS CUTTER
KSh1,174.00 -
PU & NYLON HEADS MALLET WITH WOODEN HANDLE 35MM
KSh2,069.00Description
A 340g sheet metal hammer with two interchangeable tips with a diameter of 35mm. Interchangeable tips are made of PU (soft) and NYLON (hard). The head is made of zinc alloy. The handle is made of hickory wood. Overall length 315mm. The connection is additionally secured with synthetic resin.
Intended use / Application
bodywork -
PVC Glove 14 Inch
KSh180.00Key Specifications/Special Features:
Red pvc coated on interlock liner gauntlet,provide perfect protection against acids, cleaning agents, alkalies and products. -
RATCHET COMBINATION SPANNER
KSh630.00 – KSh2,250.00 -
RATCHET HALFMOON SPANNER
KSh3,695.00 – KSh4,720.00